A Binder Cover

My daughter had an ugly binder so I told her I would cover it for her. In the past I have done the kind of covers where it's glued right to the binder, but this time I wanted something she could move to another binder when hers wore out.

To start with you need two pieces (one is the cover and one is the liner) of fabric cut one inch longer and one inch taller than the binder. You will also need two pieces for the pockets to put the binder ends in. I made these the same height as the pieces for the binder and about 5 inches wide.

 Then I hemmed one long side on each "pocket" piece and laid it on my lining fabric.

I laid the cover fabric right-side down on this. Here I've pulled it back a little so you can see that I have right sides facing each other. I sewed all the way around leaving a two-inch opening for turning.

Before turning I trimmed the corners so they would look neater when turned.

  I turned it and inserted the binder.

I felt the front needed something more so I started to play around with fabric scraps. I cut out these apple and apple blossom pieces and covered them in modge podge so they wouldn't fray.

Then I cut an "E" from fleece (it doesn't fray) and hot glued all the decorations to the front.

We were both pleased with the results. I recently made another one for her sister. I used the skirt of a ruffled skirt. I made the dress years ago for my oldest daughter but the bodice is stained now so I thought I would put the skirt to use. Here's the result...

Have you ever covered a binder?